Electrical Energy System Donald L. Smith Energy Consultant
What I am going to try to accomplish here is to eleiminate all un-ecessary minutia. Whether fact or fiction it can become a trivial per-suit and a waste of time to argue these subjects, I will eleiminate these, and try ferverently to include everything I gather from Don's writings that are pertenant to accomplishing his Electrical Energy system in operation. Within the next few pages I will expose only the a proposal Nicola Tesla and Don Smith are suggesting. I will not include any hyperbaly that is in the text I am copying from.
I am not discounting Don's arguements whatsoever.
This explanation will be an exersize of cretive understanding, in placing updated knowlege at your fingertips. Whether it becomes a useful tool or selectively ignored it is your choise.
Electrons are defined as a practical source of electrical and magnetic energy. When the electron is agitated it produces magnetic and negative electrical energy.
The electron as a particle was postulated by professor J. Thompson in early 1900s. It is now universally accepted the electron exist and it is the source of electricty.
Improving upon professor Thompson's postulation, other obvious character defines the electron. It has both electrical and magnetic emanation resulting from a right and left hand spin. Since amperage and magnetic are one package this suggests, that electrons in a natural non-ionic state exist as doublets. When pushed apart by agitation one spins and supplies electricty and the other spins and supplies magnetic (amperage) energy. When they reunite, we have Volts X Amperage = Watts. This idea, until now, has been totally absent from the knowledge base.
The times an electron is cycled sets the collective energy potential present. The electrical equivelent of E = MC squared is E = (Volts X Amperes) X Cycles Per Second squared. Thoes who choose, are now free to head for the bushes and make there unusual contribution to hymanity.
Coulomb's and Newtons's inverse square law is ignored and it's opposite is allowed in only in the most abstract status. Without opposites we have no definitions.
The cumulative capacitance and inductance as the distal ends of a Tesla coil are approached, results in energy greater than the input being present. This energy is real when properly understood. It can be safely measured by "magnetic flux methods and electrostatic voltmeters", based on the inverse square law.
As seen above flux lines result both from induction-henrys-amperage and Capacitance-coulombs-volts and defined electrical energy. The non-linier of this system does not obey ohms law, which is replaced with impedance and reactance for alternating current systems. Impedance is the sum of the system resistance, which becomes Zero at resonance. In resonate induction systems, cycles per seconds increases, which invokes a second round for the law of squares.
The degree to which flux lines are present, disturbs an equal anount of electrons, upsetting ambient, resulting in useful electrical energy. The frequency at which the disturbance occurs, obeying the law of squares further accelerates away from ambient, increasing the useful energy available. Two square law entities, flux density and frequency are envoked. Enter resonance which cancels the resistive effect.
If I see it correctly Don is saying There are two forces here.
One; Magnetic flux lines present,
Two; disturbs an equal amount of Electrons.
Thus: One Gamma is equal to 10 active Volts of electricty. >>>>>>>>>
24 gamma will equal 240 Volts.>>>>>>>>>>>>>>>>>>>>>>>>>
One Oersted is equal to 50,000 volts. >>>>>>>>>>>>>>
One gauss is equal to 100,000 volts.>>>>>>>>>>>
Wow! Just think what one tesla value would be!
"Gamma"is ordinary, everyday magnetic flux, while "gamma-ray" is highimpact energy and not flux.
(One milligauss of magnetic flux is equal to that of 100 volts RMS. To see this, take a Plasma Globe emitting 40,000 volts. When properly used, a gamma meter placed nearby, will read 400 milligauss.)
There are two kinds of electricity: "potential11 and "useful".
All electricity is "potential" until it is converted.
The resonant-fluxing of electrons, activates the electrical potential which is present everywhere.
The Intensity/CPS of the resonant-frequency-flux rate, sets the available energy. "Potential"
This must then be converted into the required physical dimensions of the equipment being used.
For example, energy arriving from the Sun is magnetic flux, which solar cells convert to DC electricity, which is then converted further to suit the equipment being powered by it. An inverter or a battery bank of whatever voltage.
Only the magnetic flux moves from point "A" (the Sun) to point "B"
All electrical power systems work in exactly the same way. Movement of Coils and Magnets at point "A" (the generator) fluxes electrons, which in turn, excite electrons at point "B" (your house). None of the electrons at point "A" are ever transmitted to point "B". In both cases, the electrons remain for ever intact and available for further fluxing.
Any coil system, when fluxed, causes electrons to spin and produce useful energy, once it is converted to the style required by its use.
"A/C or D/C".
Now that we have described the method which is required, let us now see how this concerns us.
The entire System already exists and all that we need to do is to hook it up in a way which is useful to our required manner of use.
Let us examine this backwards and start with a conventional output transformer. Consider one which has the required voltage and current handling characteristics and which acts as an isolation transformer.
Don is suggesting we start from the Isolation transformer, "output side".
Moreover, if you are expecting to measure amperage in the input side of the isolation transformer, you do not yet understand Don's systems.
Only at the output side of the isolation transformer does amperage become part of the equasion.
All of the electrical manipulation before the induction side of the isolation transformer is high frequency wave, not dealing with impedance of the wires.